一、產品詳細資料Product Details：

產品型號：ZJHF(H)型

產品名稱：ZJHF型氣動三通薄膜合流閥

產品特點：ZJHF(H)氣動三通調節閥有合流和分流兩種結構形式。閥芯結構采用圓筒薄壁窗口，并采用閥芯側面導向，三通閥在某些場合可以替代兩個二通閥和一個三通接管而等到廣泛應用，常用于熱交換器的兩相調節，也可用于簡單的配比調節。公稱通徑和壓差較小時，合流閥可用于分流場合，可互換使用，但公稱通徑大于80mm和壓差較大的分流場合，不能互換使用。

Model: ZJHF (H)-type

Product Name: ZJHF type pneumatic three-film mixing valve

Features:ZJHF (H) pneumatic three-way diverting valve has two structural forms and confluence. Thin-walled cylinder valve structure using the window, and the use of spool side oriented, three-way valve in some cases can replace the two two-way valve and a three-way over and wait until the widely used, commonly used in heat exchangers of the two-phase adjustment can also be used for a simple ratio adjustment. Nominal diameter and pressure is small, the mixing valve can be used for streaming applications, are used interchangeably, but the nominal diameter greater than 80mm and larger shunt pressure situations, can not be used interchangeably.

 二、閥體Body：

閥體形式：三通鑄造球型閥
公稱通徑：25—300mm
公稱壓力：PN1.6 4.0 6.4MPa
連接形式：法蘭式按JB78-59 JB79-59
材料：HT200 ZG230—450 ZG1Cr18Ni9Ti
ZG0Cr18Ni12Mo2Ti

Body form: Tee ball valve casting
DN :25-300mm
Nominal pressure: PN1.6 4.0 6.4MPa
Connection: Flanged according to JB78-59 JB79-59
Material: HT200 ZG230-450 ZG1Cr18Ni9Ti
ZG0Cr18Ni12Mo2Ti

三、上閥蓋On the valve cover：

常溫型：-20~ 200℃
散熱型：-40~ 450℃
壓蓋形式：螺栓壓緊式
填料:V型聚四氟乙烯填料,柔性石墨。

Normal temperature type: -20 ~ 200 ℃
Cooling type: -40 ~ 450 ℃
Gland in the form: Bolt Clamp
Packing: V-PTFE packing, flexible graphite.

四、閥內組件Valve components：

閥芯型式：V型缺口芯
流量特性：線性或等百分比
材料：1Cr18Ni9Ti 0Cr18Ni12Mo2Ti

Spool type: V-notch core
Flow characteristics: linear or equal percentage
Material: 1Cr18Ni9Ti 0Cr18Ni12Mo2Ti

五、執行機構Executive body：

型 式：多彈簧式薄膜執行機構
膜片材料：丁晴橡膠夾增強滌綸織物
彈簧范圍：0.02~0. 1、0.04~0.20MPa
供氣壓力：0.14 0.16 0.28MPa
氣源接頭：M10×1
環境溫度：-30~ 70℃

Style: multi-spring diaphragm actuator
Diaphragm Material: NBR folder enhanced polyester fabric
Spring range: 0.02 ~ 0. 1,0.04 ~ 0.20MPa
Gas pressure: 0.14 0.16 0.28MPa
Air connection: M10 × 1
Ambient temperature: -30 ~ 70 ℃

六、性能Performance：

泄漏量：符合標準ANSIB 16.104IV級，小于額定Kv值的0.01%
基本誤差：±1%
回 差：1%(帶定位器) 3%(不帶定位器)
線 性：±1% (帶定位器) ±5%(不帶定位器)備注：使用V型聚四氟乙烯填料
可調范圍：30:1

Leakage: the standard ANSIB 16.104IV level, less than 0.01% of rated Kv value
Basic error: ± 1%
Hysteresis: 1% (with locator) 3% (without positioner)
Linearity: ± 1% (with locator) ± 5% (without positioner) Note: The use of V-PTFE packing
Adjustable range: 30:1

七、流量系數Kv值和行程Flow coefficient Kv values ??and stroke：

八、允許壓差值Permissible differential pressure values：

1、氣動三通薄膜合流閥Pneumatic three-way mixing valve membrane：

備注：①下面數字為分流場合壓差，其余為合、分流相同

Note: ① The following figures for the diversion occasions pressure, rest together, the same diversion

2、氣動三通薄膜分流閥Pneumatic three-way diverting valve membrane：

九、外形尺寸Dimensions：

十、型號編制說明Model preparation instructions：